Make your designs more dynamic- try Textured Carbon Fiber! 

Textured Carbon Fiber is a product that has the look and feel of real carbon fiber. It is gravure-printed to add an exciting dimension to your designs. It comes on a sticky carrier, which enables easy weeding and re-positioning.

Product Colors

Mouse over the swatches for product name and number!

Cut Settings

PLEASE NOTE: Every blade and machine is a little bit different- always remember to test cut! These cut settings are a starting point to be adjusted to your blade and machine.

Cricut

  • Material: Light Cardstock
  • Pressure: Default
  • Blade: Deep Cut Blade

Silhouette

  • Material: Heat Transfer, Flock
  • Blade: 4
  • Speed: 8
  • Force: 16

Graphtec

  • Speed: 8
  • Force: 24

We use a 60° blade.

Tech Info

Tech PDF includes product thickness, roll sizing, and other technical information

Application Instructions

Blade – 60°
Cut – Mirror image
Temp – 325° F
Pressure – Medium, even
Time – 15 seconds
Peel – Cold
Care – Wash warm water. Tumble dry normal.
Layerable? – Top layer only

Applies to: Cotton, Uncoated Polyester, Fabric Blends, Lycra, Wool, Linen Excluding Nylon

*You cannot layer anything on top or beneath this material.

*If pressing onto thin fabric, you need to put a Teflon Sheet inside the garment to ensure the adhesive doesn’t transfer to the other side.