SubliFlex^®

Product Overview

• Matte sublimation material in four options • Can sublimate onto cotton and dark garments, not just white polyester • Thin and easy to use • Smooth White, Glitter White, Glitter Silver can be printed on directly A matte thermo transfer film with a polyester backing. Available in four colors: Glitter Silver, Glitter Clear, Glitter White, and Smooth White. The Glitter Silver, Glitter White, and Smooth White can be printed on directly- no sublimation paper required! This is a fantastic white, clear, and silver HTV to sublimate on. Don’t limit yourself to just white polyester garments- SubliFlex® also works on cotton and even dark garments!

SubliFlex^®

Design Sample

Cotton, Uncoated Polyester, Fabric Blends, and Rayon

Available Size (in.):
8.5” x 11″ and 11” x 16″

140-160 microns

SubliFlex^®

Application Instructions

Cutting

BLADE ANGLE
45° Blade

Mirroring

RIGHT READING
Trim excess white from design with cutter or scissors. Please note, the Glitter Clear cannot be run directly through the printer. Please sublimate with sublimation paper printed in reverse and pressed at 375° F for 30 seconds.

Temperature

VARIABLE
315°-320° F

Pressure

Medium, even

Time

15 seconds

Peel

Warm not hot

Washing

Wash inside out. Gentle cycle, warm or cold water. Tumble dry. Do not dry clean. No bleach or aggressive cleaning agents

Layerable?

If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production.

IT'S BEST TO TEST!

If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production.

SubliFlex^®

Cut Settings

N/A

Please Note

Every blade and machine is a little bit different- always remember to test cut! These cut settings are a starting point to be adjusted to your blade and machine.

SubliFlex^®

Cut Settings

SubliFlex^®

Tech Info

Tech PDF includes product thickness, roll sizing, and other technical information

TRANSFER MASK – SubliMask if needed

Special Precautions: We recommend testing with your sublimation printer to determine suitability for production. Layering is not recommended. Wait at least 24 hours after pressing before washing. Please note: SubliFlex® is NOT compatible with latex or Inkjet/toner based printers/copiers. Ink on surface of product may smear before sublimating. Keep touching on surface to a minimum.

FOR HEAT SENSITIVE GARMENTS

SUBLIMATION – Pre-activate sublimation inks by peeling off the backing, placing a siliconized sheet on and pressing it at 375°F with low pressure for 30 seconds