ColorPrint™ Solvent/Ecosol
ColorPrint™ Solvent/Ecosol
Product Overview
fabrics
sizing
Available Widths (in.): 24”
Available Lengths (ft.): 15’, 30’, 45’, 60’, and 75’ rolls
thickness
2.8 mils/70 microns
This is our most popular solvent printable product, also printable using latex* printers. ColorPrint Solvent/Ecosol is an opaque, white film with a semi-gloss to full-gloss finish. It offers a soft hand and stretchable resilience. This allows application to elastomeric fabrics, such as Lycra and Spandex. This film contains blocking agents that reduce dye migration into the film and has a new thicker liner to reduce curling.
This printable can be used by solvent/eco-solvent, UV, and latex printers.
*If using on a latex printer, you must use TM-853 or TM-854, use Gloss Vinyl Profile, print uni-directional, and never heat above 205°F/96°C on the printer settings. Our testing has shown that when properly printed with solvent-based inkjet inks, images on these films maintain their quality and color without discernible fading for over 50 washings.
*For printing with UV ink: Print using the following print settings: Print Profile- MGVC, 600×600 dpi,16 pass. When pressing, press for an additional 5 seconds- for a total of 20 seconds.
Application Instructions
IT’S BEST TO TEST!
If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production.
UV Printers – 20 seconds
fabrics
sizing
Available Widths (in.): 24”
Available Lengths (ft.): 15’, 30’, 45’, 60’, and 75’ rolls
thickness
2.8 mils/70 microns
Now contains blockers! An opaque, white film with a satin matte finish and features a soft hand. This film contains blocking agents that reduce dye migration. It also has a new thicker liner to reduce curling.
This printable can be used by solvent/eco-solvent, UV, and latex printers.
*For printing with Latex ink: You must use TM-853 or TM-854, use Gloss Vinyl Profile, print uni-directional, and never heat above 212°F/100°C on the printer settings.
*For printing with UV ink: Print using the following print settings: Print Profile- MGVC, 600×600 dpi,16 pass. When pressing, press for an additional 5 seconds- for a total of 20 seconds.
Application Instructions
IT’S BEST TO TEST!
If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production. UV Printers – 20 seconds
fabrics
sizing
Available Widths (in.): 24”
Available Lengths (ft.): 15’, 30’, 45’, 60’, and 75’ rolls
thickness
2.8 mils/70 microns
An opaque, silver film with a metallic semi-gloss to full gloss finish.
This printable can only be used by solvent/eco-solvent printers.
Application Instructions
IT’S BEST TO TEST!
If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production. TIME – 15 seconds
IMPORTANT: To prevent the ink from washing out, you must wait 24 hours after printing to apply this material.
fabrics
sizing
Available Widths (in.): 24”
Available Lengths (ft.): 15’, 30’, 45’, 60’, and 75’ rolls
thickness
5.6 mils/140 microns
This is a silver glitter polyurethane material that creates a metallic glitter sheen to every color printed and has a semi-gloss finish. Designed for printing with solvent/eco-solvent printers.
This printable can only be used by solvent/eco-solvent printers.
Application Instructions
IT’S BEST TO TEST!
If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production. TIME – 15 seconds
PEEL – Warm, not hot. Repress with PTFE for 5 seconds
sizing
Available Widths (in.): 24”
Available Lengths (ft.): 15’, 30’, 45’, 60’, and 75’ rolls
thickness
2.6 mils/65 microns
An opaque white film for use on leather, vinyl and other low temperature substrates. This film has a new thicker liner to reduce curling. It features a soft hand and stretchable resilience. It has a semi-gloss finish.
This printable can only be used by solvent/eco-solvent printers.
Application Instructions
IT’S BEST TO TEST!
If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production. TIME – 10-15 seconds
PEEL – Warm, cover with transfer tissue or PTFE sheet and re-press for 10 seconds
Special Precautions: After printing, please leave the print on the printer and allow it to cure for 30 minutes prior to cutting and masking. This will prevent curling of the material.
Tech Info
Tech PDF includes product thickness, roll sizing, and other technical information
CPS-2160
White Frost CPS-2165
Silver CPSS-2168
Glitter CPSG-2180
Leather/Vinyl CPLV-2700
ColorPrint™ Solvent/Ecosol
Product Colors
CPS-2160
White Frost
CPS-2165
Silver
CPSS-2168
Glitter
CPSG-2180
Leather/Vinyl
CPLV-2700
