Cotton, Uncoated Polyester, Fabric Blends, Spandex, Wool, Linen, and Nylon
Available Widths (in.):15” and 20”
Available Lengths (ft.):15’, 30’, 45’, 60’, 90’, and 150’ rolls
4 mils/100 microns
• HTV that adheres to a wide variety of fabrics, including nylon
• A quick press and goes on at a low temperature, making it faster to use than other products
• Does not encourage dye migration
• Durable, soft, and easy to cut and weed
ThermoFlex®TURBO presses quickly at a low temperature, which eliminates press marks.
Durable, weeds easily, and has a soft hand and strong grip. Does not encourage dye-migration since it has a low heat and quick press time.
Pressure-sensitive carrier enables easy weeding and repositioning.
If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production.
MIRRORINGCut this material into a mirror image.
TEMPERATURE 270° F
PEELINGNeons, Columbia Blue, & Berry: Peel cold.All others: Peel warm. | Nylon: Neons, Columbia Blue, & Berry: Peel cold.All others: Peel warm. Cover with silicone sheet and re-press for 10 seconds.
WASHINGTurn inside-out, wash warm, regular cycle, mild detergent. Do not use bleach. Tumble dry normal. Do not iron directly onto this material. Suitable for dry-cleaning.
LAYERABLE? Yes with the following exceptions- Columbia Blue, Metallics, Berry, and Neons are top layer only
TEMPERATURE 300° F
TIMINGPre-press garment for 5 seconds, then press the design for 5 seconds.
PEELINGNylon: Neons, Columbia Blue, & Berry: Peel cold. All others: Peel warm. Cover with silicone sheet and re-press for 10 seconds.
LAYERABLE?Yes with the following exceptions- Columbia Blue, Metallics, Berry, and Neons are top layer only
PRESSURE – Medium |Nylon: Low pressure
Tech PDF includes product thickness, roll sizing, and other technical information
PLEASE NOTE: Every blade and machine is a little bit different- always remember to test cut! These cut settings are a starting point to be adjusted to your blade and machine.
We use a 45° blade.
Mouse over the swatches for product name and number!