Pressure Sensitive GlitterFlex® Ultra

Say hello to Pressure Sensitive GlitterFlex® Ultra! Get the same great look of the GlitterFlex® Ultra without using a heat press.  This pressure-sensitive sticker film can go on just about any smooth, dry surface.  Put your glitter designs onto canvas, cups*, tables, trays, mirrors, mailboxes, vases, cell phones, laptops, lampshades, walls, wine bottles, glasses, etc.  This film can also be sublimated.

*Not recommended for washing. Do not use outdoors or in direct sunlight – fading will occur.

Product Colors

Mouse over the swatches for product name and number!

Cut Settings

PLEASE NOTE: Every blade and machine is a little bit different- always remember to test cut! These cut settings are a starting point to be adjusted to your blade and machine.


  • Material: Iron+
  • Pressure: Default
  • Blade: Deep Cut Blade


  • Material: Heat Transfer, Glitter
  • Blade: 3
  • Speed: 8
  • Force: 16


  • Speed: 8
  • Force: 22

We use a 60° blade.

Tech Info

Application Instructions

Blade – 60°
Cut – Right reading
Care – Not recommended for washing. If washing is required, carefully hand wash.

Transfer Material – We recommend cutting solid designs. Masking is difficult with an uneven glitter surface. If you need a material, use HFIX-FLCK. Mask using hard force with squeegee and slowly peel liner away from decal. 

Sublimation – Heat sublimation on top of vinyl at 390° F for 30 seconds.

Applies to: Applies to most clean, dry, hard surfaces, such as metal, wood, glass, ceramic, acrylic, etc.

Customize decals for wine bottles and glasses, laptops, cell phones, makeup boxes, etc.

Not suitable for heat transfer. Do not use outdoors or in direct sunlight – fading will occur.