EcoPrint™

Product Overview

EcoPrint™ Solvent/Ecosol HEF-PU6 EcoPrint™ is a white, opaque polyurethane material with a matte finish. It is thin and elastic, making it suitable for letterings, logos, or small images. It was designed for printing with solvent or eco-solvent printers and can be used with latex printers. Please be aware that this printable has a slightly sticky carrier and it needs HFIX-FLCK to remove the print from the backing. We recommend that you take the backing from the transfer mask, not taking the film from the backing.

EcoPrint™

Design Sample

Cotton, Uncoated Polyester, Blended Fabrics, and Lycra

Available Widths (in.):
20”, 30″, and 60”

Available Lengths (ft.):
(20″ & 30″) 15’, 30’, 60’, and 90’ rolls (60″) 90′ only

3.2 mils/80 microns

EcoPrint™

Application Instructions

Cutting

BLADE ANGLE
45° Blade

Mirroring

RIGHT READING
Cut this material Right Reading

Temperature

330° F

Pressure

Firm, even

Time

20 seconds

Peel

Warm, cover with Teflon and re-press for 10 seconds

Washing

Wash inside out, warm water, tumble dry low. No fabric softeners or bleach. Iron inside-out.

Layerable?

Yes

If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production.

IT'S BEST TO TEST!

If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production.