ThermoFlex Plus

The most trusted name in the industry!

ThermoFlex® Plus is our most popular heat transfer vinyl and the best in the industry!

ThermoFlex® Plus is a durable material that is highly flexible. It has a soft hand and a strong grip. If applied properly, it will outlast the life of the garment!

Compare the ease of weeding and applying ThermoFlex® Plus with competitive products and you’ll discover why so many professionals ask for it by name.

ThermoFlex® Plus is available in a huge range of colors- over 120! Plus comes in 90 colors with a matte finish, 9 metallic, 7 neon, 18 metal flake, and 4 glossy to create whatever your heart desires!

If you haven’t tried ThermoFlex® Plus yet, what are you waiting for?

Product Colors

Mouse over the swatches for product name and number!




Metal Flake


Tech Info

Tech PDF includes product thickness, roll sizing, and other technical information

Product Videos

Application Instructions

Blade – 45°
Cut – Mirror image
Temp – 320°-330° F
Pressure – Medium, even
Time – 15 seconds
Peel – Warm (except Neons and Columbia Blue- peel cold), cover with Teflon and repress for 2 seconds.
Care – Wash warm water. Tumble dry normal. Dry-cleaning okay.
Layerable? – Yes with the following exceptions- neon colors, metallics, metal flake colors, and Columbia Blue are top layer only
Applies to: Cotton, Uncoated Polyester, Cotton/Polyester, Polyester/Acrylic, Linen, Wool
This product cannot be used on nylon.

Most colors of ThermoFlex® Plus may be applied in layers with the exception of:

  • Columbia Blue
  • Metallics
  • Metal Flakes
  • Neons
  • These colors cannot have layers adhered on top of them, although we have successfully layered these products on top of other colors. Look through our photo gallery above to see examples of layered designs.

    Be advised that dye-migration has occurred with low energy dyes in polyester and poly-blend fabrics.

    Cut Settings

    PLEASE NOTE: Every blade and machine is a little bit different- always remember to test cut! These cut settings are a starting point to be adjusted to your blade and machine.


    • Material: Iron-On
    • Pressure: Default
    • Blade: Fine-Point Blade


    • Material: Heat Transfer, Smooth
    • Blade: 3
    • Speed: 8
    • Force: 6


    • Speed: 8
    • Force: 14

    We use a 45° blade.