SubBlocker Printable™
SubBlocker Printable™
Product Overview
White SBP-2090
Subblocker Printable™ is a sublimation resistant, white polyurethane film. It has an additional layer to block dye migration. Subblocker Printable™ is suitable for light and dark fabrics and has a semi-matte finish. It offers high-resolution prints, has a soft hand, and has excellent weeding properties. Printable using solvent/eco-solvent inks.
SubBlocker Printable™
SubBlocker Printable™
Design Sample
- SIZING
Available Widths (in.):
20”, 30″, and 60”
Available Lengths (ft.):
(20″ & 30″) 15’, 30’, and 90’ rolls (60″) 90′ only
- THICKNESS
5.2 mils/130 microns
SubBlocker Printable™
Application Instructions
Cutting
BLADE ANGLE
45° Blade
45° Blade
Mirroring
RIGHT READING
Cut this material Right Reading
Cut this material Right Reading
Temperature
VARIABLE
285°-295° F
285°-295° F
Pressure
Medium, even
Time
0 seconds
Peel
Cold
Washing
Wash inside out, gentle cycle, cold water, tumble dry low. Not suitable for dry-cleaning.
Layerable?
Yes
- IT'S BEST TO TEST!
If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production.
IT'S BEST TO TEST!
If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production.
SubBlocker Printable™
Cut Settings
N/A
N/A
N/A
Please Note
Every blade and machine is a little bit different- always remember to test cut! These cut settings are a starting point to be adjusted to your blade and machine.
SubBlocker Printable™
Cut Settings
SubBlocker Printable™
TRANSFER MATERIAL – KTM-500
Note: Do not pre-heat the garment!
Tech Info
Tech PDF includes product thickness, roll sizing, and other technical information
