Subli-Print® SP4680L is a heat-sealable, white polyester fabric with a twill-like feel. It can be printed on directly with sublimation ink.

Suitable for use with Sawgrass, Ricoh, or similar sheet-fed sublimation printers. Great for creating easy patches!

Use with registration marks and plotter-cut or cut by hand.

Available in 8.5″x 11″ and 11″x 17″ sheets and is sold in packs of 10 and 50.

Product Videos

Tech Info

Instructions - General

Print – Right reading. Trim excess white from design with cutter or scissors

No transfer mask necessary

Care – Wash inside out. Gentle cycle, warm or cold water. Tumble dry. Do not dry clean. No bleach or aggressive cleaning agents

Applies to: Cotton, Uncoated Polyester, Fabric Blends

Application Instructions - Heat Sensitive Garments

Sublimation – Pre-activate sublimation inks by pressing with silconized paper on top at 375° F, low pressure, 30 seconds

Temp – 320° F – peel off backing before press

Time – 15 seconds
Pressure – Medium, even

Application Instructions - All Other Garments

Sublimation – Sublimation inks can be activated in one press while adhering to garment

Temp – 375° F – peel off backing before press
Time – 30 seconds

Pressure – Low to medium, even

Close Menu