For most fabrics

Subliblock™ polyurethane films use dye blocking chemistry to prevent discoloration from polyester fabric caused by dye migration into the film.

► Create your design in graphics software, such as Corel Draw and mirror the image in the effects menu.

► Load Subliblock™ onto your plotter.

Always test cut to ensure proper depth, speed and down force.

Cut in mirror image.

Weed film from carrier that you do not want to transfer.

Place image on the surface to which you are transferring the film

Place a Teflon sheet between the heat platen and the polyester carrier sheet to prevent sticking and edge damage of the transferred design.

► Heat press between 310° F - 330° F for 10 - 15 seconds using firm even pressure.

►If Subliblock™ only partially adheres to the fabric it is usually because insufficient or uneven pressure was applied. If this happens, reposition the design, increase the pressure and repress.

► Let completely cool before removing the carrier sheet. Peel cold.

► Follow wash instructions for nylon. Turn inside-out, wash and dry at regular settings.

► Adheres to most fabrics.

 

All technical information and recommendations are based on tests we believe to be reliable. We cannot guarantee performance, however, for conditions not under our control. Before using, please read our product descriptions and instructions to determine the suitability of each product for your intended use. The user assumes all risk and liability in connection with their use.

Print This Page